Weber Carb Installation For Suzuki Samurai
These photos & instructions are intended to help you in installing the Weber K601 conversion kit on to your Suzuki Samurai. This carb conversion kit is intended for RACING & OFF-ROAD use only, please check your local & Federal laws before removing any emissions related component.


1. Stripped manifold after removal of carb and other emission devices.


2. Install bottom adapter plate with allen bolts, be sure to seal all gaskets with a silicone sealant between all adapters, lock-tite bolts with blue Lock-tite. We recommend the Permatex Ultra-Copper for a sealant.

Next

 
Copyright © 2000 4x4 Connection, Inc. All rights reserved.